Model GP-2HD

Hand Operated, Single Diaphragm, 4.6 Gallon Hopper.

GP-2HD GP1 & GP2 Manuals Owner's Manual PDF 4.4MB

IDEAL FOR GROUTING METAL DOOR FRAMES

• Clevis stabilizer greatly extends diaphragm life and reduces pumping effort
• Hand operated; no electric or air power source needed
• Easy to operate, minimal maintenance required
• Pumps most types of cementitious grout (not for epoxy-type grouts)
• Makes an ideal tool for placing grout anywhere that high pressure is not required
• Lightweight and compact

Specifications Model GP-2HD:

Model	Kenrich GP-2HD
Pump Type	Single Diaphragm, Self-Priming
Power Source	Hand Operated
*Output Capacity	6 gallons/minute (48 cu. ft./hr)
Output Pressure	0 to 15 psi
Hopper Capacity	.62 cubic foot (4.6 gallons)
Placement Hose Size	1-1/2" ID by 60" long, Clear Vinyl
Discharge Head	10 foot Vertical Lift
Dimensions	23-1/2" x 12" x 23" high
Net Weight	21 pounds

*Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.

OPTIONS:

Hose Reducer Kits	3/4" and 1" ID Available
1-1/2" ID Hose Lengths:	10 feet, 15 feet, and 20 feet
1-1/2" Hose Ends	Straight, 90 degree and 180 degree Elbows
Port Seal	Rubber, will fit 1-1/2" Hose Ends
Handle	Vertical Actuator and Handle

GP-2HD GP1 & GP2 Manuals Owner's Manual PDF 4.4MB

 

Kenrich Products, Inc. 3881 N.E. Bryant St., Portland, OR 97211
Mail Address: PO Box 55053, Portland, OR 97238-5053
Phone: 503.281.6190 • Fax: 503.281.6227

Copyright © 2012 Kenrich Products, Inc.