Our most popular pumps are single diaphragm hand-operated models. The GP-1 has a small 1.9-gallon hopper and can pump up to six gallons per minute with a maximum output pressure of 15 psi. Weighing only 19 pounds allows for great mobility. The supplied standard grout placement hose is 1 ½" ID by 5’ long clear vinyl tubing with a polished interior and a rigid straight steel tube in the end. Optional 1 ½" hoses available in 10’, 15’ and 20’ lengths. Popular options include our ¾" and 1" hose reducer kits which attach directly to the outlet of the pump and are used in place of the standard 1 ½" hose. Click here for more information on our line of GP-1 grout pump Upgrades, Accessories and Repair Kits.
Kenrich Pump Specs/ Model GP-1:
|Pump Type:||Single Diaphragm, Self-Priming|
|Power Source:||Hand Operated|
|Output Capacity*:||6 gallons/minute (48 cu. ft./hr.)|
|Output Pressure:||0 to 15 psi|
|Hopper Capacity:||.25 cubic foot (1.9 gallons)|
|Placement Hose Size:||1-1/2" ID by 5’ long, Clear Vinyl|
|Discharge Head:||10 foot Vertical Lift|
|Dimensions:||22-1/2" x 10" x 14-1/2" high|
|Net Weight:||19 pounds|
*Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.
|Hose Reducer Kits:||3/4" and 1" ID Available|
1-1/2" ID Hose Lengths:
|5', 10', 15', 20' and 50' long|
|1-1/2" Hose Ends:||Straight, 90 degree and 180 degree Elbows|
|Hi-Capacity Hopper Kit||Converts GP-1 to GP-2 Specifications|
The Kenrich line of heavy-duty grout pumps are designed to pump non-shrink sand based cementitious grouts. However if you need to pump Grout with AGGREGATE, we recommend a factor premix Grout in the bags with no bigger than 3/8” pea gravel. Crushed rock/stone 3/8" in size and larger, not recommended do to jagged edges, even though some contractors make it work. Call the office for more info at 1-503-281-6190.