Kenrich Products

The Leader in Heavy Duty
Hand Grout Pumps since 1986!

GP-2 / Kenrich’s Most Popular Heavy Duty Grout Pump

Single diaphragm, large 4.6-gallon hopper, built to last.

Our most popular grout pump is the GP-2, a single diaphragm hand-operated model with the larger 4.6-gallon hopper. Capable of pumping up to six gallons per minute with a maximum output pressure of 15 psi. Weighing only 21 pounds, the GP-2 allows for great mobility. The supplied standard grout placement hose is 1 ½" ID by 5’ long clear vinyl tubing with a polished interior and a rigid straight steel tube in the end. Optional 1 ½" hoses available in 10’, 15’ and 20’ lengths. Popular options include our ¾" and 1" hose reducer kits which attach directly to the outlet of the pump and are used in place of the standard 1 ½" hose. Click here for more information on our line of GP-2 grout pump Upgrades, Accessories and Repair Kits. 

Kenrich GP-2 Grout Pump Features and Benefits.

  • Cementitious Grout Pump- Pumps non shrink sand based cementitious grouts. 
  • Hand Operated- No electric or air power source, no problem.
  • Low Pressure- 15 psi max. - Ideal anywhere high pressure is not required.
  • Heavy Duty- Built for durability and long lasting performance 
  • Lightweight and Portable- Take the pump to where you need the grout.
  • Easy to Operate- Minimal maintenance required.
  • Built with pride in the USA.
  • In Stock / Ready to Ship UPS. We have Kenrich grout pumps, accessories and parts in stock and are ready to ship UPS ground, 2 day or overnight. 
Click and swipe to scroll

Kenrich Pump Specs/ Model GP-2:

Pump Type Single Diaphragm, Self-Priming
Power Source Hand Operated
Output Capacity* 6 gallons/minute (48 cu. ft./hr.)
Output Pressure 0 to 15 psi
Hopper Capacity .62 cubic foot (4.6 gallons)
Placement Hose Size 1-1/2" ID by 5’ long, Clear Vinyl Hose
Discharge Head 10’ Vertical Lift
Dimensions 23-1/2" x 12" x 23" high
Net Weight 21 pounds
*Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.

 

Kenrich grout pump hose reducer kit, from1 1/2" to 1" ID x 5' clear vinyl hoseKenrich Pump's 1 1/2" heavy duty clear vinyl replacement hose in 5' sectionsGalvanized steel pump hose end nozzles

 Options:

Hose Reducer Kits:                         3/4" and 1" ID Available
1-1/2" ID Hose Lengths:                      5’, 10’, 15’, 20’ and 50’ long
1-1/2" Hose Ends                                   Straight, 90 degree and 180 degree Elbows

 

Pumping Aggregate Materials Through Your Kenrich Grout Pump.

The Kenrich line of heavy-duty grout pumps are designed to pump non-shrink sand based cementitious grouts. However if you need to pump Grout with AGGREGATE, we recommend a factor premix Grout in the bags with no bigger than 3/8” pea gravel. Crushed rock/stone 3/8" in size and larger, not recommended do to jagged edges, even though some contractors make it work. Call the office for more info at 1-503-281-6190.

For more information on our Kenrich Products’ Model GP-2 Heavy Duty grout pump, go to  Upgrades, Accessories and Repair Kits and the GP-2 Owner's Manual.